To listen to music/audio
1. Connect the included headphone cable to the port on the left earcup, making certain the plug is
firmly seated.
2. Connect the other end of the headphone cable to the headphone jack of your audio device.
• Use 3.5 mm (
1
/
") stereo mini plug to connect to MP3, CD player, DVD player, computer, and
8
other audio devices equipped with a 3.5 mm output jack.
• Use included 6.3 mm (
(
1
/
") output jack.
4
• Use included airline adapter to connect to typical airline audio systems.
NOTE: The headphones cannot be used with devices equipped with 2.5 mm earphone jacks.
Please purchase an optional mono/stereo adapter for use with a mono device. (Without use of an
adapter, the right channel is muted when headphones are connected to a mono device.)
3. To activate noise-cancelling function, move the power switch on your headphones to the "ON"
position; power indicator should light (blue). (If you do not wish to use the active noise-cancelling
function, move power switch to the "OFF" postion.)
4. Turn on your audio device. (Volume should be set at a low level at first; adjust as necessary on
audio device.)
For noise-cancelling only
1. To activate noise-cancelling function, move the power switch on your headphones to the "ON"
position; power indicator should light (blue). In this case, there is no need to connect the
headphone cable; simply turn the headphones on and wear them.
After using
• After you have finished using your headphones, be certain to move the power switch to the
"OFF" position.
• Remove battery when you will not be using the headphones for an extended period.
• Store the headphones in included protective carrying case; store accessories in attached pouch.
• To clean the headphones, wipe with a clean, soft cloth. Do not use solvents such as benzene or
paint thinner on the headphones.
• Ear pads will wear over time. Replacement pads are available from Audio-Technica dealers.
6
Using your headphones
1
/
") stereo adapter to connect to home stereo equipped with 6.3 mm
4