Publicidad
Idiomas disponibles
Idiomas disponibles
Forced ejection method in case of
emergency
In a case such as the following, a disc can be removed using the forced ejection hole.
• If the unit fails and the disc cannot be ejected with the eject button or software
1
Check that it has powered off and the disc has stopped rotating after waiting at least one minute.
2
Straighten out a paper clip and insert it straight into the forced ejection hole and push hard.
3
The disc tray comes out about 5 to 10 mm. Pull the tray all the way out and remove the disc.
Caution
• Do not force eject a disc while it is rotating. An injury or disc damage may occur.
• Do not place any object within 12 cm of the front of the unit as it may obstruct the disc ejection
operation.
15
En
Publicidad
