Troubleshooting - H.Koenig MXC36 Manual De Instrucciones

TROUBLESHOOTING

Malfunction
The device does not funtion
Liquids are not mixed correctly
The blades becomes blocked
after turning on
Technical Data
Power supply: 220～ 240V, 50Hz
Power consumption of motor : 450W
Power consumption of heater: 700-900W
Protection class: 1
Net weight L approx. 2.9kg
The right to make technical and design modifications in the course of continuous product
development remains reserved.
Subject to technical changes without prior notice!
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste
product into communities, you will need to inform your local authorities about the places where you can
return this product. In fact, electrical and electronic products contain hazardous substances that have
harmful effects on the environment or human health and should be recycled. The symbol here indicates
that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a
cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 05
Possible cause
The device is not supplied with
power
The safety switch is not closed
The device is defective
You have too much or too little
liquids in the bowl
The speeds is too high
The selected speed is too
Remedy
Check the outlet with a different
device
Insert the power plug correctly.
Check your domestic fuse
Check that the mixing jug and the
lid are fitted correctly
Contact our
specialist
Vary the quantity of the liquid
Start with a lower speed which
you can increase later
low. Start at a higher speed
our Service or a