Audio-Technica AT-LP1240-USBXP Manual De Usuario página 8

Preparation for use
Setting tonearm balance
1. Remove the cartridge's protector.
2. While lightly holding the headshell so as not to move the
tonearm, unlatch the clamp.
• The tonearm is tilted because the balance has yet to be adjusted.
Clamp
3. While still lightly holding the headshell, turn the counterweight to
adjust the tonearm's balance.
• Adjust the balance so that the tonearm is level when you release the headshell.
Adjust so that tonearm is level
4. Return the tonearm to the tonearm rest and latch the clamp.
Setting tracking force
1. While supporting the counterweight so that it does not move,
turn the tracking force gauge ring so that its "0" position lines up
with the centerline on the back of the tonearm.
• The tracking force is not adjusted simply by turning the tracking force
gauge ring.
7
Tonearm Counterweight
Tracking force
gauge ring
Centerline
2. Turn the counterweight and the tracking force gauge ring
together counterclockwise (to the left) until the centerline value
matches the recommended tracking force value for the cartridge
you are using.
• Refer to the cartridge maker's specifications for the recommended tracking
force value.
• The standard tracking force value for the cartridge provided with this
product is 3.0 g.
Setting the anti-skate adjustment
While the record is playing, a force acts on the stylus tip to pull it
inward. This force can be counteracted by setting the same values for
anti-skate and the tracking force.
Adjust the anti-skate control dial to have the same value as the tracking
force value.
• The standard tracking force value for the cartridge provided with this
product is 3.0 g.
Installing/removing the dust cover
• The dust cover is designed to protect the product's sensitive
components when the product is not in use. It should remain off
while records are playing.
• Using the dust cover during play may result in record damage or
sound degradation.
• Always remove and replace the dust cover carefully.