Additional Menu Items; Setup Menu - Sony DSBK-1820 Instrucciones De Instalación

Additional Menu Items

SETUP MENU

Level 1
OPERATIONAL
FUNCTION
:
:
DIGITAL
PROCESS
22 Overview
- The same timecode is embedded in the HD SDI as recorded
according to the timecode settings of the DSR-1800/1800P/1800A/
1800AP unit. To embed an external timecode input in synch with
video signals, set SYSTEM EE MODE to ON, and configure the
timecode setting to EXT/REGEN.
• Installing this board requires a DSR-1800/1800P/1800A/1800AP or
DSR-1600/1600P/1600A/1600AP upgrade.
For details, contact your Sony dealer or a Sony service representative.
Note
Always verify that the unit is operating properly before use.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY
OTHER REASON WHATSOEVER.
When this board is installed in the DSR-1800/1800P/1800A/1800AP or
DSR-1600/1600P/1600A/1600AP, the following additional items
appear in the setup menus.
For details of how to use the menus, refer to the Operating Instructions for the DSR-
1800/1800P/1800A/1800AP or DSR-1600/1600P/1600A/1600AP.
In the table, the underlined settings are the factory default values.
Level 2
REPEAT FUNCTION
:
:
:
SYSTEM EE MODE
Level 3
Refer the Operating Instruction of DSR-1800/
1800P/1800A/1800AP or DSR-1600/1600P/
1600A/1600AP.
Settings