Sony DSBK-1820 Instrucciones De Instalación página 37

2Remove the screws in all four corners of the TX-96 board.
3Lift up the TX-96 board, disconnect it from the SDI-93 board,
and move it to the side. Fasten the supplied screw A in hole
I.
TX-96 board
4Replace the TX-96 board so it is connected to the SDI-93 board,
and fasten with screws in all four corners.
7
Attach the screws A and B in the remaining holes in the SDI-93
board, attaching it to the unit.
TX-96
board
Screw A
SDI-93
board
Hole I
Installation 37