Operational Buttons
rapidly. A melody will be played when the GPS Collar is in pairing mode.
* The GPS Collar pairing mode is used to pair the GPS Collar and the GPS
Connector. The Pathfinder set comes with both parts paired to each other.
60
GPS Connector
The SELECT button is used to turn
on/off and select a device to pair.
While turned on, press the Select
button once to set pairing to the
GPS Collar, press the Select button
a second time to set pairing to the
smartphone app.
The CONNECT button is used to
connect the GPS Connector to a
Phone and GPS Collar. Press and hold
down the Connect button until the
LED blinks rapidly. The GPS Connector
will now be ready for pairing.
* Using the Select button, set the GPS
Connector to Collar to pair the GPS
Connector with the GPS Collar.
Setting the GPS Connector to Phone
is used to pair the GPS Connector to
a phone.
GPS Collar
Power On : To turn the GPS Collar
on, press the Power button until the
green LED turns on.
Power Off : To turn the GPS Collar
off, press the power button until the
LED turns off.
Pairing : To place the GPS Collar into
pairing mode, begin with the device
turned off and hold down the
power button until the LED blinks
About the LED
Connector into pairing mode and the LED will blink rapidly in green.
COLLAR : Press the Select button once to set the GPS Connector to Collar.
When set to Collar, a green LED will stay on. Holding down the Connect
button will place the GPS Connector into pairing mode and the LED will
blink rapidly in green.
GPS Connector
POWER : The POWER LED blinks
every 2 seconds while turned on. The
LED colors, green (~50%), orange
(~10%), and red (~0%), represents
the battery life.
PHONE : Press the Select button
twice to set the GPS Connector to
Phone. When set to Phone, a green
LED will stay on. Holding down the
Connect button will place the GPS
GPS Collar
The LED on the GPS Collar blinks
while turned on, and the LED colors
green (~50%), orange (~10%), and
red (~0%), represents the battery life.
61