System Specifications - Kinetico Water Systems Aqua Kinetic A200 Manual Del Usuario

System Specifications

TDS Maximum Level:
pH Range:
Pressure Ranges:
Temperature Range:
Discharge Water/Product Water Ratio:
Rated Service Flow:
Rated Filter Capacity (postfilter):
Typical Daily Production Rate:
Maximum Daily Production Rate:
* Note: TDS levels above 1,500mg/L must have greater than 50 psi.
** Manufacturer's calculated max. rate with open storage tank, ideal inlet water pressure of 100 psi,
temperature of 98˚F and 100 ppm TDS conditions.
The A200 Drinking Water System is tested and certified by WQA against NSF/ANSI
Standard 42 and 58 for the reduction of claims specified on the Performance Data
Sheet. Also conforms to CSA Standard B483.1 - Drinking Water Treatment Systems
(Refer to the Performance Data Sheet for individual contaminants and reduction
performance).
3000 ppm*
3-11
35-100 psi (241.3-689.5 kPa)
35˚- 100˚F (2˚- 38˚C)
6 to 1
1.0 gpm (4.5 Lpm)
500 gal (1892.7 L)
10.9 gpd (41.3 L)
30 gpd** (113.5 L)
12