Memory Functions - Pando PHV9400 Manual De Instrucciones

EN

Memory Functions

Memory Functions (M1 – M3)
This function is intended to store three separated settings that can be saved and called.
Store a memory
Turn the Function Selector knob (1) and
1.
select the desired function.
Turn the Rotating knob (7) to set the
2.
desired parameters for the selected
function.
Press the Clock key (5) for 5 seconds.
3.
After the 5 seconds the M1 indicator starts
blinking.
Selecting a stored memory
o use one of the stored memories proceed as
T
follow:
Delete a memory
To delete a memory proceed as follows with the
oven in standby mode:
1. Turn the Function Selector knob (1) to
select the stored memory (M1-M3).
12
Turn the Rotating knob (7) to navigate the
4.
menu and to chose one of the available
memories M1 – M3.
Press the "OK" key (4) to validate.
5.
Turn the Function Selector knob (1) to
1.
select the stored memory (M1-M3).
Press the "start key (3).
2.
2. Press the Clock key (5) for approximately
5 seconds.
3. The right display shows the word "dEL".