Safety And General Information; Product Description - Pro-Lift T-5500 Manual De Instrucciones

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read,
understand, and follow the information provided with and
on this lift. The owner and operator of this equipment shall
have an understanding of this lift and it's safe operating
procedures before attempting to use. The owner and
operator shall be aware that use and repair of this product
may require special skills and knowledge. Instructions
and safety information shall be conveyed in the operator's
native language before use of this lift is authorized. If
any doubt exists as to the safe and proper use of this lift,
remove from service immediately. Inspect before each
use. Do not use if broken, bent, cracked or damaged
parts are noted. Any lift that appears damaged in any
way, or operates abnormally shall be removed from
service immediately. If the lift has been or is suspected
to have been subjected to a shock load (a load dropped
suddenly, unexpectedly upon it), immediately discontinue
use until it has been examined by a Pro-Lift authorized
service center. It is recommended that an annual
SPECIFICATIONS
Base Size (L x W)
53-1/2" x 17"
Lift Platform
Wheel Basket
Height
Locking Lever
Height Unlocking
Lever
Lift Surface Capacity
Platform 750 lbs.
Wheel Basket 500 lbs.
Locking Swivel
Casters
Figure 1 - Model T-5500/T-5501 Nomenclature
inspection be done by qualified personnel. Labels and
Operator's Manuals are available from the manufacturer
(see Replacement Parts, pg. 6 & 7).

PRODUCT DESCRIPTION

The Pro-Lift Mower Lift is specifically designed to lift, and
support, up to rated capacity loads consisting of a single
riding lawn mower whose frame is compatible with the
lifting platform. Incompatibility is evident when the loaded
mower wobbles, feels unstable, and/or does not sit
securely on the lift platform. This product is NOT suitable
for lifting, leveling and/or positioning automobiles, trucks,
SUV's or conveyances other than those specifically listed
and approved above. This product is NOT suitable for
lifting, leveling and/or positioning houses, construction
trailers and dwellings in general. This product does not
contain independent lifting devices, but is designed to
be permanently assembled. The Hydraulic Unit is not to
be used independently of the lift.
Compatible Wheel Track
N/A
55-1/2" outside span
Crosshead
Assembly
Ram
Positioning
Handle Pin
Oil Filler
Plug
2
Min. Height
4-1/2"
Ram
Oil Filler
Plug
Hydraulic Unit
Air
Coupler
Air
Motor
Air Operated
Hydraulic Unit
Max. Height
31"
27"
Release
Valve
Handle
Lift Pedal
Sleeve
Manual