Polar Pattern; Frequency Response - Audio-Technica ATM350a Manual De Usuario

Specifications

Polar pattern

Frequency response

Low frequency roll-off
Open circuit sensitivity
Maximum input sound level
Dynamic range
Signal-to-noise ratio
Phantom power requirements
Output connector
Optional interchangeable elements
• Characteristic weighting measured when connected to an AT8543 power module.
• 1 Pascal = 10 dynes/cm
2
• For product improvement, the product is subject to modification without notice.
* Mounted on an AT8543 power module.
Polar pattern
Frequency response
40–20,000 Hz
50 500
100 200
Frequency in Hertz
Element Fixed-charge back plate, permanently polarized condenser
Cardioid
40 - 20,000 Hz
80 Hz, 12 dB/octave
-49 dB (3.5mV) (0dB=1V/Pa, 1 kHz)
Impedance 200 ohms
159 dB SPL (1 kHz THD 1%)
130 dB (1 kHz at Max SPL)
65 dB (1 kHz at 1Pa, A-weighted)
11 - 52 V DC, 3.5 mA
Switch* Flat, roll-off
Weight Microphone: 14.5 g (0.5 oz), Power module: 90 g (3.2 oz)
Microphone: 37.8 mm (1.49") long, 12.2 mm (0.48") diameter
Dimensions
Power module: 92 mm (3.62") long, 18.9 mm (0.74") diameter
Power module: Integral 3-pin XLRM-type
4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13")
Cable(s)
diameter, 2-conductor shielded cable with HIROSE HR10-type connector
UE-O omnidirectional, UE-H hypercardioid
AT8543 power module, microphone instrument mount, AT8468 violin mount,
Accessories
hard shell carry case
= 10 microbars = 94 dB SPL
330˚
300˚
270˚
240˚
210˚
180˚
5k
1k 2k 10k 20k
0˚
30˚
60˚
LEGEND
200 Hz
90˚
1 kHz
5 kHz
8 kHz
120˚
150˚
LEGEND
10 dB
• Characteristic weighting measured when connected to
an AT8543 power module.
6
SCALE IS 5 DECIBELS PER DIVISION
0°, 50 cm
Roll-off
E
N