Tapping The Beer Keg - Igloo Kegorator Manual De Instrucciones

TAPPING THE BEER KEG

(SINGLE VALVE-TYPE KEG)
1.
Make sure the black pull handle
of the Coupler is in the open (up)
position, then insert the Coupler into
the locking neck of the beer keg.
3.
Make sure the Tap Tower is in the closed
(handle pointing straight up) position.
Secure the connection by pulling the
Coupler handle out and pushing down
until it locks into position. The pull handle
will "click" when it shifts into the final
downward position. This will open the beer
and CO 2 gas valves. The Keg is now tapped.
13
2.
Turn the Coupler clockwise until
it locks securely into position.