Mounting The Forklift; To The Back Of A Truck Or Trailer - BRIGHT Coop BC3 6560 Manual Del Operador

To the back of a Truck or Trailer

1. Set the parking brake on the truck and / or
trailer and chock the tires.
2. Approach the truck or trailer with the fork-
lift mast extended forward.
3. Raise and align the forklift's forks with the
truck or trailer's fork support.
4. Move the forklift forward fully inserting
the forks.
5. Raise the rear tire by tilting the mast back.
6. Raise the forklift by lowering the forks. Fig 9.
7. Retract the mast placing the tires over
the supports.
8. Raise the mast, to lower the tires on the
supports. Fig 10.
9. Turn the engine off and remove the key.
10. Attach the securing chains to the truck
of trailer.
11. Tilt the mast forward to release the hy-
draulic pressure, allowing the forklift to be
supported by the securing chains. Insure
both securing chains are tight and proper-
ly support the forklift.
12. Connect the trailer lighting cable into the
receptacle provided.
Bright Forklift
BC3–6560

MOUNTING THE FORKLIFT

The mounting kit for the forklift must be supplied or
When loading the forklift onto or off the back of a truck
or a flatbed trailer. Always operate the control levers
slowly and carefully. Abrupt maneuvers can harm the
operator and damage the forklift. ALWAYS WEAR YOUR
SEATBELT DURING FORKLIFT OPERATION
The forklift must be supported by the securing chains
and, NOT by the forks during transport
Mounting/Unmounting the Forklift
approved by Bright Coop Inc.
Fig 9
Fig 10
31