Filling Solution Tank; Adjusting Control Console Height - Tennant T2 Manual De Operador

5. Align the pad driver/brush mounting studs with
motor hub slots and give the pad driver/brush a
quick counter--clockwise turn to engage spring clip
(Figure 11).
6. To remove the pad driver/ brush, press down on
the motor hub lock pin and turn the pad
driver/brush clockwise (Figure 12).
7. When transporting or storing machine, remove the
brush and hang it on the storage strap (Figure 13).
Tennant T2 (08- -11)
Motor
Spring
Hub Slot
Clip
Pad Driver/Brush
Mounting Stud
FIG. 11
Lock Pin
FIG. 12
FIG. 13

FILLING SOLUTION TANK

Remove the solution tank cover and fill the tank with 6.9
gallons/26 liters of water (<140F/60C temperature). Do
not fill beyond the "MAX" level (Figure 14).
NOTE: When filling the solution tank with a bucket,
make sure that the bucket is clean. Do not use the
same bucket for filling and draining the machine.
Pour a recommended cleaning detergent into the
solution tank according to mixing instructions on the
bottle.
ATTENTION: Only use recommended cleaning
detergents. Machine damage due to improper
detergent usage will void the manufacturer's
warranty.
WARNING: Fire or Explosion Hazard.
Never Use Flammable Liquids.
FOR SAFETY: When using machine, follow mixing
and handling instructions on chemical containers.

ADJUSTING CONTROL CONSOLE HEIGHT

Loosen the control console height adjustment knob and
lift or lower the console to a comfortable operating
height. Tighten knob to lock in position (Figure 15).
ENGLISH
FIG. 14
FIG. 15
9