Snakebyte KEY:BOARD ULTRA Manual De Instrucciones página 3

FN + : Brightness -
FN + : change lighting direction
FN + : change lighting colour
INDIVIDUAL KEY COLOR CHANGE MODE (PC APPLICATION NOT REQUIRED)
1. Connect keyboard ultra to your PC or Mac.
2. Press FN + M1 to enter the individual key color change mode (2 red LED & 1 purple LED
start flashing at upper right corner).
3. Press any key to change the backlight color on it. Same color will be applied to all pressed
keys.
4. Press FN + to change the color. 8 colors are available for selection.
5. Press FN + M1 to exit the individual key color change mode. (LED at upper right corner will
turn off).
SOFTWARE
Up to three player profiles can be programmed, adapted and selected via the software. Specify
the individual lighting configuration and the polling rate (125 Hz, 250 Hz, 500 Hz, 1000 Hz)
in the profiles.
In macro management, individual keys can be used with macros and saved macros can be cal-
led. The use of macros makes it possible to execute recurring commands or key combinations
with a key press.
To customize the snakebyte KEY:BOARD ULTRA™ please download the configuration software
here:
http://mysnakebyte.com/main-menu/support/downloads/pc.html
LED LIGHTING EFFECTS
The keyboard supports numerous RGB backlighting, which can be selected by key combination.
In total, the keyboard provides 18 different types of lighting effects. The keys L1 to L6 each
comprise three different illumination modes. Press FN + FN [lock / unlock] to enter the
customization.
The following key combination allows you to switch between preset lighting modes:
FN + L1:
Mode 1: Slow breathing with color change
Mode 2: Breathing without color change
Mode 3: Spreading from the center without color change
FN + L2:
Mode 1: Press key, continuous lighting over the entire keyboard, then lighting off
Mode 2: Pressed key is lit, then lighting off
Mode 3: When the push button is pressed, the entire row lights up, then lighting off
FN + L3:
Mode 1: Lighting from the center, flashing
Mode 2: Lighting from side to center then from center to side
Mode 3: Random flashing at the same color
EN