Installing The Camera; Mounting The Camera On The Tv Monitor - Sony IPELA PCSA-CXA55 Manual De Instrucciones

Installing the
Camera
Mounting the Camera on the
TV Monitor
Mount this camera unit to the top of the TV
monitor.
1
Remove the protective cover from the
suction cup.
2
Determine the location to which the
suction cup will be attached.
To determine a location for the suction
cup, rest the camera unit on the top of the
TV monitor, and move the adjustable
link arm.
Notes
• Do not tilt the TV monitor 20 degrees or
more in the forward or back direction.
(This will exceed the camera unit's tilt
range (±20 degrees).)
• Depending on the TV monitor model,
certain areas may get hot. Avoid these
areas when determining a location for
mounting.
• Do not obstruct the ventilation holes of
the TV monitor when mounting the
camera.
• The suction cup may not attach securely
on the following types of TV monitors.
In such cases, affix the supplied adhesive
disc to the TV monitor, and then attach
the camera unit to the disc.
If you do not use the adhesive disc, the
suction cup may not attach securely, or
the TV monitor may be warped or
damaged.
– TV monitors made of soft materials
that bend to the touch
– TV monitors with rough surfaces
• Select the location to affix the adhesive
disc carefully.
As the disc is highly adhesive, it cannot
be easily removed once it is affixed to
the TV monitor. Attempting to remove
the disc with excessive force may warp
or damage the TV monitor.
• Wait at least 24 hours for the adhesive
disc to fully adhere to the surface before
attaching the camera unit to the disc.
• Once removed, the adhesive disc cannot
be affixed again, as its adhesive
properties are reduced.
TV monitor rear
Supplied adhesive disc
3
Secure the camera unit to the TV
monitor with the suction cup.
While pressing down hard on the center
of the suction cup lever, turn it in the
direction illustrated (LOCK direction).
Notes
• The camera unit cannot be mounted on
ceilings or walls.
• If you do not apply enough pressure when
pressing down on the center of the suction
cup lever, the suction cup lever may become

Installing the Camera

Turn.
Press down hard.
21