Edirol Canvas SD-20 Manual Del Usuario página 38

Getting connected and installing drivers (Windows)
fig.2-26_80
12
The Select Port dialog box will
appear.
Select the serial port to which the
SD-20 is connected, and click
[Next].
The number of COM ports will
depend on your computer system.
fig.2-27_40
13
The Select MIDI OUT Port
Number dialog box will appear.
Select SD-20, and click [Next].
14
The Installation information dialog box will appear.
Check the displayed contents, and click [Next].
15
The Computer Switch Setting dialog box will appear.
Make sure that the computer switch on the rear of the SD-20 is set to [PC], and
click [Next].
If it is not set to [PC], perform this procedure again from step 1.
16
When driver installation has been completed, the Restart Computer dialog
box will appear. Restart your computer.
Next, you need to make the driver settings.
(-> Settings and checking (p. 39))
38