Oil Change - Honda GX120 Manual Del Propietário

Ocultar thumbs Ver también para GX120:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Oil Change

Drain the used oil when the engine is warm. Warm oil drains
quickly and completely.
1.
Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick, oil drain plug and washer.
2.
Allow the used oil to drain completely, then reinstall the oil
drain plug and new washer, and tighten the oil drain plug
securely.
Please dispose of used motor oil in a manner that is compatible
with the environment. We suggest you take used oil in a sealed
container to your local recycling center or service station for
reclamation. Do not throw it in the trash, pour it on the ground,
or pour it down a drain.
3.
With the engine in a level position, fill with the recommended oil
(see page ) to the upper limit mark (bottom edge of the oil fill
6
hole) on the dipstick.
Running the engine with a low oil level can cause engine
damage. This type of damage is not covered by the Distributor's
Limited Warranty.
4.
Install the oil filler cap/dipstick and tighten securely.
OIL FILLER CAP/DIPSTICK
DRAIN PLUG
WASHER
UPPER LIMIT
ENGLISH
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Gx160

Tabla de contenido