Audiolab LIVE 16XL Manual De Usuario página 43

DSP Control
6.13 Routing interface
You can select input channels of Main 1-20, FX1-2 and USB
in and route them to output channels of Main 1-20, Sub 1-4,
Aux 1-4 and FX1-2. For example, below window shows Aux 1
routing function. In this page, you can route input channels
in LCD screen to Aux1 output.
In Main routing page, channel level can not be adjusted, but
channel level in Sub, Aux and FX pages are adjustable.
As the function of this button will be a little bit different in
different control please notice the notes that are shown on
the LCD screen when operating.
Touch it to route input channel 1 to output AUX1 as an exam-
ple. Please rotate Parameter Adjust knob or slide long fader
on the screen to change selected channel's audio level.
Touch PRE on the screen, it will switch to POST, and the back-
ground will illuminate. The selected channel will derive its
signals from all channels post-fader. If the button has not
been pressed and not illuminate, by default, the selected
channel will derive its signal from all channels pre-fader and
all unaffected by the sending channel's fader position.
This icon is a switch to change all channels to be POST or
PRE. If the selected channel was linked, they will change syn-
chronous in this page when you adjust them.
LIVE 16XL
ENGLISH VERSION
Slide the fader or rotate Parameter Adjust knob
to adjust level of selected input channel
p. 43