Safety Information; Symbols Used In This Manual; Interference With Other Electronic Devices; Introduction - Rain Bird WR2 Serie Manual Del Usuario

Ocultar thumbs Ver también para WR2 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Safety Information

Symbols used in this manual:

F
Symbol alerts the user to
the presence of un-insulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute a risk
of electric shock.
!
Symbol alerts the user to
the presence of important
operating or maintenance
(servicing) instructions.
Interference With Other
Electronic Devices
All radio transmitters broadcast energy
through the air. This energy may interfere with
other electronic devices in close proximity to
the WR2 Wireless Sensor. To lower the risk of
electronic interference:
Do not place sensitive electronics
(computers, telephones, radios, etc.)
in close proximity to the Controller
Interface or Sensor.
Use clip-on ferrite sleeves on the
connection or power cables of affected
electronic device(s).
!
THE IRRIGATION CONTROLLER
/ TIMER SHOULD BE ISOLATED
VIA A CIRCUIT BREAKER OR
CUTOFF SWITCH.
!
BATTERIES REMOVED FROM
THE SENSOR SHOULD
BE DISPOSED OF IN
ACCORDANCE WITH LOCAL
REGULATIONS.
!
CHANGES OR MODIFICATIONS
NOT EXPRESSLY APPROVED
BY THE PARTY RESPONSIBLE
FOR COMPLIANCE COULD
VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.
WR2 user manual (637469-01) EN ESMX FRCA.indd 1
WR2 Wireless Sensor • www.rainbird.com/WR2

Introduction

Congratulations on your purchase
of the WR2 Wireless Sensor.
The Rain Bird Wireless Rain Sensor is
designed for residential and commercial
irrigation systems. It saves water and extends
irrigation system life by automatically sensing
precipitation and interrupting irrigation
during rain and low temperature events.
Programming logic can suspend irrigation
using the "Quick Shut Off " feature or when
the amount of rainfall exceeds the rainfall
set point. Likewise, the Wireless Rain / Freeze
Sensor will suspend irrigation when the
sensor temperature reading is below the
temperature set point.
At Rain Bird, we are focused on developing
products and technologies that use water
in the most efficient manner possible. The
rain and rain / freeze sensor illustrate Rain
Bird's commitment to this Intelligent Use
of Water. The product is part of Rain Bird's
family of water conservation solutions that
include the Soil Moisture Sensor, U-Series and
Rotary Nozzles, the ESP-SMT and ET Manager
Controllers.
Please read through these instructions
in their entirety or refer to the
programming demo (www.rainbird.
com/WR2) before installing your WR2
Wireless Sensor. Also, reference your
irrigation system controller / timer
installation instructions for the proper
connection of rain sensors.
1
2/23/2018 8:09:23 AM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wr2-48 serieWr2

Tabla de contenido