Yamaha TDW-120 Manual De Usuario página 18

1. Remove the clip that's attached to the
Transmitter, then gently press down and
slide the battery case cover on the near
panel of the Transmitter to remove it.
2. Properly orient the battery and insert it into
the unit.
3. Reattach the battery cover on the Transmit-
ter.
Attaching and removing the
supplied clip on the Transmitter
Insert the clip into the clip attachment groove
on the Transmitter and slide it in all the way.
Make sure that you insert the clip in the correct
orientation.
18
To remove the clip, hold the Transmitter
securely and slide the clip while holding it by
its sides.
When you attach the clip do not touch the
connectors on the Transmitter.
Do not pull the clip by grasping the
pinching portion of the clip. Otherwise, the
clip may break.
When you attach the clip, be sure to slide it
in all the way until it is locked, then make
sure that it's secure.
Small clip
Regular clip