Whisking; Pulsing; Chopping/Grinding - Cuisinart Smart Stick CSB-179 Manual De Instrucciones

TO PULSE
1. Press and hold the LOCK/UNLOCK button.
2. Then press and hold the ON/OFF button.
3. Repeatedly press and release the ON/OFF button
while continuing to hold down the LOCK/UNLOCK button
to PULSE until ingredients reach desired consistency.

WHISKING

1. Insert the whisk assembly into the motor body.
(See Assembly for Whisk Attachment, page 8.)
2. Plug electrical cord into a wall socket.
3. Put the whisk into mixture that will be whisked.
4. Turn the variable speed slide to the desired speed.
To begin whisking, follow the instructions in #5 under
OPERATION BLENDING.
5. Unplug immediately after use.

CHOPPING/GRINDING

1. Place the work bowl firmly on a flat, sturdy surface like a
countertop.
2. Put food in the work bowl. Be sure the food is cut into small
pieces (½ to 1 inch), and the bowl is not overloaded.
3. Put the work bowl cover on top of the work bowl. Be sure the
cover is properly seated.
4. Turn the variable speed slide to the desired speed. To begin
processing, follow the instructions in #5 under OPERATION
BLENDING (unplug immediately after use).
NOTE: Due to the powerful motor provided with this unit,
Cuisinart recommends using one hand to support the work
bowl during operation.
5. When you have finished processing the food, stop the unit by
releasing the ON/OFF button.
WHEN THE BLADE STOPS MOVING,
6.
7. Remove the motor body with the cover from the work bowl.
8. Carefully remove the chopping blade, holding it by the gripping
ridges on the plastic sheath.
ITSELF.
9. Remove food from work bowl with a kitchen tool.
NOTE: Do not operate the chopper/grinder attachment
without food contents in the work bowl.
unplug the unit.
NEVER TOUCH THE BLADE
12