(VOL/PGM)
("call waiting" service*)
* You need to subscribe to this service from your telephone company.
Note
If another call comes in by "call waiting" service while conversing with an
outside caller, you will hear two short beeps.
Tip
To inform you of an incoming call, the display shows "** RINGING **" when ringing.
If you have subscribed to the Caller ID service;
• the caller's number and/or name appears on the display when you receive a
call (see page 32) or when another call comes in by "call waiting" service.
• the ringer sound changes to a higher tone if the call matches the number
stored on ONE-TOUCH DIAL buttons, speed dialing keys or in the Phone
Directory (memory match function; see page 32).
1
• Press
(TALK/ CALL WAITING/ FLASH).
• Pick up the handset from the base
phone when the handset is placed
"TALK" appears on the display and
the display also shows the operation
(HOLD)
display of the base phone and the
LINE lamp on the base phone lights
up.
During a conversation, you can adjust
the handset volume. Follow the
procedure described in the following
table.
2
(OFF) or place the handset on the base
phone.
The display and the LINE lamp on the
base phone go off.
Do this
four levels.
Press (TALK/ CALL WAITING/ FLASH).
Press (TALK/ CALL WAITING/ FLASH) again to return to the first
caller.
or
continued
17
US
Basics