Transport, Packaging And Storage - SICK PBS plus Instrucciones De Uso

Operating Instructions

4. Transport, packaging and storage

The flush-mounted version is delivered with a special protective cap to protect the
membrane.
Manually remove this protective cap just before mounting to prevent damage to the
„
membrane or the process connection thread.
Keep the protective cap for storage or transport.
„
Mount the protective cap when removing and transporting the device.
„
4.1 Transport
Examine the pressure switch for any damage that may have occurred in transit. Also check the
membrane for optical damage when using a flush-mounted version.
Report any obvious damage immediately.
4.2. Packaging and storage
Do not remove packaging until immediately before assembly.
Retain the packaging as it offers ideal protection during transport (e.g., when changing the instal-
lation site or sending for repair).
Permissible conditions at the storage location:
Storage temperature: –20 ... +70 °C
Humidity:
Mount the protective cap to protect the membrane before putting into storage.
O P E R A T I N G I N S T R U C T I O N S P B S p l u s
4 2
4. TRANSPORT, PACKAGING AND STORAGE
45 ... 75% relative humidity (no condensation)
PBS plus
8024946 | SICK AG
Subject to change without notice