Changing The Purifying Filter - Bosch PAD 12001 Instrucciones De Uso

Changing the
purifying filter
Important!
If the water tank is extracted during operation,
set the water stopcock to the position indicated
in fig. 10 to prevent any water from dripping
onto the base of the appliance.
Fig. 11
The appliance is supplied with a basic air filter
joined to the air inlet grille. This filter needs to be
cleaned when the appliance has been in operation
for a long period of time, Fig. 12. To clean the filter,
flush it under a running tap, dry and replace.
Warning!
Do not try to clean the basic filter in a
dishwasher. The plastic the basic filter is made
of is unable to withstand the high temperatures
involved in washing programmes and may
deform.
The appliance is also fitted with a Double Active
Purifying Filter. This filter must be changed on a
yearly basis in order for the appliance to work
properly and can be acquired at high street
suppliers or from our Technical Service Network.
Fig. 12
The reference of the filter is:
To change the filter, dismantle the filter and the
cover which protects it, extracting them as shown
in figures 12 and 13. Reassemble by following the
same procedure in reverse order.
Fig. 13
Double Filter B1REZ12000
31