Setting The Tv Display - Yamaha DVX-1000 Manual De Instrucciones

Getting started

Setting the TV display

Set the aspect ratio of the DVD receiver according to the
TV you have connected. The format you select must be
available on the disc. If it is not, the TV display setting
will not affect the picture during playback.
1 In DVD/CD mode, press SET UP.
2 Press
/ repeatedly to select [VIDEO SETUP
PAGE].
3 Press
/ to highlight [TV DISPLAY], then
press .
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PICTURE SETTING
ADV PICTURE
PROGRESSIVE
COMPONENT
4 Press
/ to highlight one of the options below:
4:3 PAN SCAN – Select this if you have a
conventional TV and want both sides of the picture to
be trimmed or formatted to fit your TV screen.
4:3 LETTER BOX – Select this if you have a
conventional TV. In this case, a wide picture with
black bands on the upper and lower portions of the TV
screen will be displayed.
16:9 – Select this if you have a wide-screen TV.
5 Select a setting and press ENTER.
Selecting the color system
(Europe and Russia models only)
This setting allows you to toggle the video signal output
between YUV (Y P P or S-Video connections) and
B R
RGB (AV MONITOR OUT connections).
Note
AV MONITOR OUT (SCART) connections are only
available for Europe and Russia models.
1 In DVD/CD mode, press SET UP.
2 Press
/ repeatedly to select [VIDEO SETUP
PAGE].
3 Press
/ to highlight [COMPONENT], then
press .
22
En
4:3 PAN SCAN
4:3 LETTER BOX
16:9
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PICTURE SETTING
ADV PICTURE
PROGRESSIVE
COMPONENT
4 Press
/ to highlight one of the options below:
YUV – Select this for Y P
connections.
RGB – Select this for AV MONITOR OUT
connections.
5 Select a setting and press ENTER.
6 To return to the previous menu, press
To exit the menu, press SET UP.
YUV
RGB
P or S-Video
B R
.