Playing Audio From An External Device - Onkyo CS-375D Manual De Instrucciones

> Before Start > Part Names

Playing audio from an external device

1
2
a Digital Optical Cable, b Analog Audio Cable
> Install
Connections
You can play the audio from external devices such as
TVs and game consoles through this unit. If the
external device has an optical digital output terminal,
connect using a digital optical cable to the DIGITAL IN
OPTICAL terminal on this unit. When the external
device is to be connected with an analog audio cable,
connect to the LINE IN jacks on this unit.
a
Playing Back
Perform the following procedure when the unit is on.
b 1. When playing a device connected to the DIGITAL IN
OPTICAL terminal, press INPUT 2/1 repeatedly to
change the input on this unit to "OPTICAL".
When playing a device connected to the LINE IN
jacks, press INPUT 2/1 repeatedly to change the
input on this unit to "LINE".
2. Start play on the player.
0 When connected by a digital optical cable, this unit
supports linear PCM signals of up to 48 kHz/24 bits
for input.
> Playback
OPTICAL
LINE
Advanced Setup | Others
23
En