Remote Controller - Onkyo CS-375D Manual De Instrucciones

> Before Start > Part Names

Remote Controller












> Install > Playback
1. Í button: Turns the unit on or into standby mode.
2. Numbered buttons: Use to directly input the CD or

USB track number when selecting tracks.

3. MEMORY button: Used to register favorite radio
stations.
4. button: Switches the information on the display.
0 Depending on the input, the operation may not
start.
5. button: Displays the menu.(
6. Cursors, ENTER button: Select the item with the

cursors and press ENTER to confirm.
TUNE 3/4: Used to select radio stations.

PRESET 2/1: Used to select stations that have

been registered.
Play buttons:
:/6: Return to the beginning of the track being
played. Press again to move to the track before.
Press and hold to rewind the track quickly.

5/9: When pressed during play, move to the
next track. Press and hold to fast-forward through
the track.

0 Depending on the input, the operation may not
 start.
7. INPUT 2/1 buttons: Switches the input to be
played. (CD / BLUETOOTH / USB / OPTICAL / LINE

/ DAB (CS-375D) / FM)
8. Play buttons:
∫ : Stops playback.
; : Plays or pauses playback.
0 Depending on the input, the operation may not
start.
9. button: Set repeat play.
10. button: Switches the input to BLUETOOTH.
11. DIMMER button: You can adjust the brightness of
the display in four steps. It cannot be turned off
completely.
12.SLEEP button: Set the sleep timer. When the time
set (10, 20, 30, 60, 90, 120, 150, or 180 minutes)
has elapsed, the unit switches to standby. If SLEEP
button is pressed after setting, the time remaining
until sleep is displayed.
13. button: Temporarily mutes audio. Press again to
cancel muting.
14.CLEAR button: Press while setting the time, the
P27) alarm, etc., to exit the settings without saving them.
Also, when pressed and held with FM/DAB, all
preset stations are deleted.
15. NOW PLAYING button: Press once to display
the current input. Press twice to display the current
time.
16. button: Returns the display to the previous state.
17.VOL i/j buttons: Adjust the volume. Adjust
between 0 and 50.
18. button: Set random play.
19.DIRECT button: Switch the DIRECT mode on and
off. ( P26)
20.TONE button: Adjust the sound quality. (
Advanced Setup | Others
P26)
7
En