Descargar Imprimir esta página

Mounting And Installation - Ampro TECSHOW HALO 60 SPOT Manual De Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

2. SAFETY WARNING INFORMATION
Caution
Keep this device away from rain and
moisture.
Caution
Unplug mains lead before opening the
housing.
Every person involved with the installation, opera-
tion and maintenance of this device has to:
be qualified
follow carefully the instructions of this manual
Please check carefully that there is no damage
caused by transportation. Should there be any,
lease consult your dealer and don't install this
device.

3. MOUNTING AND INSTALLATION

Cautions
For added protection mount the fixtures in areas
outside walking paths ,seating areas,or in areas
were the fixture might be reached by unauthorized
personnel.
Before mounting the fixture to any surface make
sure that the installation area can hold a minimum
point load of 10 times the device's weight.
Fixture installation must always be secured with a
secondary safety attachment, such as an appropri-
ate safety cable.
Never stand directly below the device when mount-
ing ,removing, or servicing the fixture, from a
ceiling,or set on a flat level surface (see illustration
below). Be sure this fixture is kept at least 0.5m
(1.5ft) away from any flammable (decoration etc.)
Always use and install the supplied safety cable as
a safe cable as safety measure to prevent accident
damage and/or injury in the event the clamp fails.
P. 3
| Tecshow Halo 60 Spot
English version

Publicidad

loading