Cleaning And Maintenance - Ampro TECSHOW MUSHROOM 40W Manual De Usuario

8. RINGING
1. Mounting bracket
2. Hanging bracket
1

9. CLEANING AND MAINTENANCE

Cleaning should be performed every 15-day period,
by using a sponge which is dipped with alcohol,
rather than wet cloth or other chemical liquid, to
clean the mirror.
Cut off power before cleaning and mainte-
nance!
Attention
Do not see directly light source when open the light,
and make sure power off before do any installation
or maintenance.
P. 10
Tecshow Mushroom 40W | English version
2
1. The applicable temperature for the lighting is
between -25°C to 40°C. Do not use the lighting
under or above the temperature.
2. The installation of the effect has to be built and
constructed in a way that it can hold 10 times
the weight for 1 hour without any harming
deformation.
3. The installation must always be secured with a
secondary safety attachment, e.g. an appropri-
ate safety rope.Never stand directly below the
device when mounting, removing or servicing
the fixture.
4. The operator has to make sure the safety re-
lating and machine technical installations are
approved by an expert before taking the device
into operation for the first time.
5. These installations have to be approved by a
skilled person once a year.
6. M8 screws on the mounting bracket which for
fixed between hanging bracket's ¢12.5mm hole.
Caution
Never look directly into the light source, as
sensitive persons may suffer an epileptic
shock.
Wires connection must be install by a profes-
sional person!