S e t u p y o u r p h o n e
■ Battery
Always switch off the power and disconnect the charger before removing the
battery. Avoid touching electronic components while changing the covers.
Always store and use the device with the covers attached.
Prolonged, continuous use of your device may increase the device temperature.
The increased temperature is a normal function of this product and does not pose
a safety concern for you or the device. If the temperature is uncomfortable to
you, use a headset or allow your device to return to room temperature before
your next call.
Remove the back cover
1. With the back of the phone
facing you, press down and
hold the back cover latch.
2. Slide the back cover toward
the bottom of the phone,
lift up and remove.
Remove the battery
After you have removed the
back cover, insert your finger
into the finger grip, and lift the
battery from its compartment.
UIM (CDMA SIM) card slot
Your phone has a built-in UIM card slot. However, the UIM is not functional in
this phone model. Avoid placing anything into the UIM card slot.
Replace
the battery
1. Insert the battery,
gold-colored
contact end first,
into the battery slot.
2. Push down on the
other end of the battery to snap the battery into place.
14