Hob To Hood Function; Care And Cleaning; Cleaning The Grease Filter - AEG DVE5971HG Manual De Instrucciones

Ocultar thumbs Ver también para DVE5971HG:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 126
To turn off the appliance press the
symbol again.

3.2 Hob to Hood function

It is an automatic function which
connects the hob with a hood. Both the
hob and the hood have an infrared signal
communicator. Speed of the fan is
defined automatically on basis of mode
setting and temperature of the hottest
cookware on the hob. You can also
operate the fan using the hob manually.
The function can be activated from panel
of the hob.
For more information how to
use the function refer to the
hob user manual.
3.3 Activating Maximum
Motor Speed
When you press the button
Maximum Motor Speed starts to operate
for 6 minutes. After that time, the
appliance returns to its previous speed
settings.
When the function is turned
on, additional touch on the
button
effects.

4. CARE AND CLEANING

4.1 Cleaning the grease filter

Each filter must be cleaned at least once
a month. Filters are mounted with the
use of clips and pins on the opposite
side.
To clean the filter:
1. Pull the cover to open it.
, the
does not have any
1
3.4 Activating and
deactivating the filter
notification
Filter alarm reminds to change or clean
the charcoal filter and clean the grease
filter. The filter indicator
(red) for 30 seconds if the grease filter
must be cleaned. The filter indicator
flashes (red) for 30 seconds if the
charcoal filter must be replaced or
cleaned.
Refer to filter alarm in care
and cleaning chapter.
1. Switch on the control panel.
2. Make sure that the icons are turned
off.
3. To activate or deactivate the charcoal
filter notification touch
seconds.
If the charcoal filter
notification is activated, the
filter icon
five times.
If the charcoal filter
notification is deactivated,
the filter icon
three times.
2. Press the handle of the mounting clip
on the filter panel underneath the
hood (1).
1
2
3. Slightly tilt the front of the filter
downwards (2), then pull.
Repeat the first two steps for all filters.
is turned on
for 3
flashes (red)
flashes (red)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dve5971hbGd5961vDd5961vDve5671hgGd5661vDd5661v

Tabla de contenido