Part Numbers - Evh 5150IIIS EL34 Manual De Instrucciones

NCE
THREE
BIAS
BB. EVH FOOTSWITCH: The footswitch allows easy selection
of any of the three channels as well as the effects loop.
When illuminated, the green, blue and red channel LEDs
correspond with the channel LEDs on the amplifier's
front panel.
Type: PR 4300

Part numbers:

Power requirement: 533W
Output: 100 watts RMS into 4, 8 or 16 ohms
Input impedance: 1MΩ
Output impedance: 4Ω/8Ω/16Ω (selectable)
Fuses: 100V units, F7A L 250V
Footswitch (included): Four-button, one/two/three/effects on-off (070926)
Tube complement: Four EL34 output tubes, eight ECC83S preamp tubes
Dimensions: Height 10.25" (26 cm)
Recommended speaker enclosure: 5150-IIIS EL34 412ST cabinet
5150 IIIS EL34
CAUTION:
CHASSIS SURFACE HOT
WARNING:
TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE
AVERTISSEMENT:
RISQUE DE
CHOC ELECTRIQUE ! NE PAS OUVRIR !
ATTENTION:
SUPERFICIE DE CHASSIS CORONA,
CHAUDE
ONE TWO
Specifications
2250260000 (120V, 60Hz) US
2250264000 (230V, 50Hz) UK
2250267000 (100V, 50Hz) JPN
120V units, F6A L 250V
Width 29.75" (75.5 cm)
WARNING:
EVH AMPLIFIER SYSTEMS
®
ARE CAPABLE OF PRODUCING
VERY HIGH SOUND PRESSURE
LEVELS WHICH MAY CAUSE
TEMPORARY OR PERMANENT
HEARING DAMAGE. USE CARE
WHEN SETTING AND ADJUSTING
VOLUME LEVELS DURING USE.
TYPE: PR 684
SERIAL NUMBER
A PRODUCT OF:
FMIC
CA U.S.A.
MADE IN MEXICO
THREE
Note: The 5150-III footswitch should be connected to
the amplifier prior to turning ON the amp power. If the
footswitch is disconnected or reconnected after power-up,
the amplifier may not function correctly.
2250261000 (110V, 60Hz) TW
2250265000 (220V, 50Hz) ARG
2250269000 (220V, 60Hz) ROK
220-240V units, F3A L 250V
Depth 11.5" (29.3 cm)
WARNING:
PARALLEL
MAINTAIN 6" CLEARANCE FOR VENTILATION.
SPEAKER OUTPUTS
4Ω 8Ω 16Ω
LOAD
IMPEDANCE
4Ω min TOTAL
100W
EFFECTS
2250263000 (240V, 50Hz) AUS
2250266000 (230V, 50Hz) EUR
Weight: 55 lbs. (25 kg)
5