Operating Instructions - Eddy TBE2 Manual De Uso

Operating instructions

Controls & adjustments
To start removing ceramic tiles, depress the Trigger switch and push the chisel on the tiles. Depressing the
switch will activate the tool motor and the push movement will initiate the striking motion.
Depending on the type of tiles and/or to remove mortar, you may have to change the angle of the tool.
To change the angle, please follow the following steps:

Unlock Lock knob (see the picture on the right below)

Lower the cover using Knob

Press on the Tool angle selector until proper angle is found. (See the picture on the left below)
When finished, move the cover to the upper position using knob and lock with the lock knob.
Picture of how to unlock the angle selector and how to cover it again
Page | 12