Assembling And Adjustments; Assembly - Husqvarna AD 10 Manual De Instrucciones

ASSEMBLING AND ADJUSTMENTS

Assembly

WARNING! The machine should be switched
!
off with the power cable disconnected from
the outlet.
CAUTION! Remove the crank from the gear
!
housing when the feed unit is mounted on
the stand. Carelessness can result in
serious personal injury.
Always lock the feeder housing before
loosening the feed unit to prevent the
drilling machine and the drill bit falling
towards the end stop. Carelessness can
result in serious personal injury.
• Lock the feed housing lock. See instructions in the
operator' s manual for the stand in question.
• The feed unit can be assembled on both sides of the
stand.
• Assemble the spacer.
• Assemble the quick mounting.
• Pull out the knob for assembling and guide the feed unit
over the quick mounting.
– 7
English