Application Options; Automatic Switch-Off; Cleaning, Storage; Technical Specifications - Bosch PFP1037 Instrucciones De Uso

Congratulations on the purchase of this
appliance from BOSCH. You have purchased a
high-quality product which will give you a great
deal of pleasure.
Parts and controls
Fig. 1
1 Heating pad
2 Fabric cover
3 Thermostat
4 Indicator light

Application options

The heating pad is designed for use on the
following body parts: arms, legs, stomach,
shoulder, thigh, calf, etc.
Switching on the appliance
Put the heating pad (N) in the fabric cover

(O). Ensure that the power cord and ther-
mostat (P) are situated outside the cover
(O). Close the Velcro fastener or zip.
Set the required temperature on the ther-

mostat (P).
Important:
For continuous operation it is recommended
to position the thermostat on the first setting.
Fig. 2
When the temperature is set on the thermostat
(P), the heating pad switches on and the indi-
cator light (Q) comes on.
Fig. 3
If the thermostat (P) is set to position "0",
the heating pad switches off and the indicator
light (Q) goes out.
Risk of burns
When using the heating pad,
ensure that a little air can circulate
between the heating pad and skin.
Never use the heating pad without
its fabric cover.
Robert Bosch Hausgeräte GmbH

Automatic switch-off

To prevent unsupervised operation,
the heating pad automatically switches off
after approx. 90 minutes continuous operation.
The indicator light flashes. To switch on the
heating pad again, first set the thermostat
to "0" and then to the required temperature.
After use, pull out the mains plug.


Cleaning, storage

Electric shock risk
Before cleaning and storing the
appliance, pull out the mains plug
and leave the appliance to cool
down!
The fabric cover is machine-washable,

see the attached care symbols.
Before washing the cover, always
remove the heating pad.
The heating pad must not be washed

in the washing machine or dry-cleaned.
Clean heating pad with a moist sponge.

The thermostat must not become wet.

Never hold under water.
Moisture damages the thermostat.
When drying the appliance, arrange

the cable in such a way that water cannot
run into the thermostat.
Do not use detergents or solvents.

These may damage the appliance.
When storing the appliance, allow it to

cool down before folding. Store the
heating pad in a dry location.
Important!
To prevent creasing the heating pad,
do not place any objects on it.

Technical specifications

Voltage
Power
Frequency
en
220–240 V~
100 W
50 Hz
9