Tabla de contenido
Publicidad
61 Configuración de VoIP
En el cuadro de diálogo Configuración de VoIP se puede definir las ajustes para las cámara con las
funciones de llamadas SIP integradas.
61.1 Configuración General de Teléfono
Parámetro
VoIP
Utilice esta opción para Activar o Desactivar la funcionalidad VoIP. Cuando ya
tenga la configuración definida, esta permanece guardada si las llamadas entrantes
están deshabilitadas.
61.2 Configuración de SIP
This section deals with the SIP releated data including the SIP address under which the camera can be called
and information about the used SIP provider.
Parámetro
Nombre de usuario
Dominio de SIP:
Registrador:
Registration Username This is the username used to authenticate for the registration. Normaly
Contraseña de
Registro:
Utilice como Proxy
Saliente:
El registro expira
después de:
61.3 Configuración de Red
This settings are used to adapt the camera to special IP networking requirenments.
61 Configuración de VoIP
Descripción
This is the name of the user who is reachabel by calling the camera. It
corresponds with the part left of the "@" in the SIP address. For
example if the SIP address of the camera is "me@mycam.net" then
the username is "me".
The SIP domain defines the Domain where the user can be found. It
corresponds with the part left of the "@" in the SIP address. If the SIP
address of the camera is "me@mycam.net" then the SIP domain is
"mycam.net". If the camera is used as a stand−alone SIP device
without registering at some SIP registrar you are free to choose
something by your own for this part of the SIP address. In this case it
could be the IP of the camera or the domainname of the network it is
in.
This is the address of the SIP registrar for the camera to register at. If
it is not empty the camera will try to register at this server. If it is empty
registration is deactivated.
this is the same es the username in the SIP address.
The corresponding password to the Registration Username is entered
here. It is also used for proxy authentifikation.
If this is enabled the registrar is also used as outbound proxy. This
means that all outgoing SIP connections will go through it. Normaly
this is done if you register at some SIP provider. It also turns proxy
authentifikation on, so that the camera will authenticate itself if the
proxy asks for it.
The registration at the registrar will expire after this time so that callers
will get a "user is not available" signal if they try to call the camera. La
cámara renovará automáticamente el registro después de esta vez.
Descripción
192
Publicidad
Tabla de contenido
