Control Knobs; Burner Control Knob Removal - Bosch 500 Serie Manual De Uso

CAUTION:
To avoid possible injury or damage to the
appliance, ensure grates are installed exactly
per installation instructions and not backwards
or upside down.
Four-burner models: When placing center grate, make sure
the horizontal bar aligns with the horizontal, center bar of
the left and right grates. See figure, "Four-Burner Center
Grate Placement" below.
Align Horizontal
Figure 7: Four-Burner Center Grate Placement
Five-burner models: When placing center grate, make sure
the horizontal rectangular support is located at the front of
the cooktop. See figure, "Five-Burner, Center Grate
Placement" below.
Figure 8: Five-Burner, Center Grate Placement
Bars
Rectangular
Support

Control Knobs

The cooktop has one control knob for each burner. Push
down and turn to the left to light and set the desired heat
setting.
CAUTION:
Failure to operate knobs properly may result in
personal injury and damage to the appliance.
The cooktop has standard burner controls and rubber
grommets.
Figure 9: Standard Burner Control Knob
The standard burner controls have an infinite number of
heat settings.
To operate: Select the appropriate control knob, push down
and turn counterclockwise to the desired flame size. Turn
off by turning the control knob clockwise to OFF.

Burner Control Knob Removal

To remove knob and grommet: With burner in the OFF
position, gently lift knob up and off. Gently pull the grommet
from the sides and lift out.
WARNING:
To avoid possible electric shock, do not reach
through control opening into rough-in box.
To replace grommet and knob: Carefully insert the
grommet into the opening, ensuring that the maintop is
seated in the track around the entire perimeter of the
grommet. Replace control knob by placing indicator line at
the 12 o'clock position. Press down firmly.
English 9