Spark Arrestor; Features - Urrea PP921A Manual De Usuario

3. Check the blade and engine mounting bolts
at frequent intervals for proper tightness. Also,
visually inspect blade for damage (e.g., bent,
cracked, worn) Replace blade with the original
equipment manufacture's (O.E.M.) blade only,
listed in this manual. "Use of parts which do not
meet the original equipment specifications may
lead to improper performance and compromise
safety!"
4. Mower blades are sharp and can cut. Wrap
the blade or wear gloves, and use extra caution
when servicing them.
5. Keep all nuts, bolts, and screws tight to be
sure the equipment is in safe working condition.
6. Never tamper with safety devices. Check their
proper operation regularly.
7. After striking a foreign object, stop the en-
gine, disconnect the spark plug wire and ground
against the engine. Thoroughly inspect the
mower for any damage. Repair the damage be-
fore starting and operating the mower.
8. Never attempt to make a wheel or cutting
height adjustment while the engine is running.
9. Grass catcher components, discharge cover,
and trail shield are subject to wear and dam-
age which could expose moving parts or allow
objects to be thrown. For safety protection, fre-
quently check components and replace immedi-
ately with original equipment manufacturer's
(O.E.M.) parts only, listed in this manual. "Use
of parts which do not meet the original equip-
ment specifications may lead to improper per-
formance and compromise safety!"
10. Do not change the engine's governor setting
or over-speed the engine. The governor controls
the maximum safe operating speed of the en-
gine.
11. Check fuel line, tank, cap, and fittings fre-
quently for cracks or leaks. Replace if necessary.
12. Do not crank engine with spark plug re-
moved.
13. Maintain or replace safety and instruction
labels, as necessary.
14. Observe proper disposal laws and regula-
tions. Improper disposal of fluids and materials
can harm the environment.
15. According to the Consumer Products Safety
Commission (CPSC) and the U.S. Environmental
Protection Agency (EPA), this product has an
average useful life of seven years, or 140 hours
of operation. At the end of the average useful
life have the machine inspected annually by an
authorized service dealer to ensure that all me-
chanical and safety systems are working prop-
erly and not worn excessively.
14
Failure to do so can result in accidents, injuries
or death.
DO NOT MODIFY ENGINE
To avoid serious injury or death, do not modify
engine in any way. Tampering with the gover-
nor setting can lead to a runaway engine and
cause it to operate at unsafe speeds. Never tam-
per with factory setting of engine governor.

SPARK ARRESTOR

WARNING: This machine is equipped with
an internal combustion engine and should not
be used on or near any unimproved forest-cov-
ered, brush covered or grass-covered land unless
the engine's exhaust system is equipped with a
spark arrestor meeting applicable local or state
laws (if any).
If a spark arrestor is used, it should be main-
tained in effective working order by the opera-
tor.

FEATURES

KNOW YOUR TOOL
Before attempting to use this product, become
familiar with all of its operating features and
safety requirements.
Your drill press has been designed for only one
purpose, mow grass, any other intended use is
strictly forbidden.
1. DRIVE LEVER (CLUTCH LEVER)
2. SOFT GRIP
3. UPPER HANDLE
4. BRAKE LEVER / STOP LEVER
3
5
6