N
4
Maintenance
Lifetime of the bed is influenced by its use, storage, regular maintenance, servicing and
cleaning.
4.1
Regular Maintenance
The maintenance activities to ensure a good condition for your Vermeiren bed are described
below:
Before every use
Every 8 weeks: inspection or adjusting from
Every 6 months or for every new user
For your convenience, on the back of this manual is a maintenance plan.
Repairing and assembling of spare parts for your bed may only be performed by the
specialist dealer.
Only authorized Vermeiren spare parts may be installed.
Check the tyres and make them clean. If necessary change the tire.
Check the brakes and adjusted if necessary.
Check the bed (cleanliness, cracks, damage on structural parts ... .) and make
it clean. If necessary change the coating.
Check the cables for visible signs of damage and whether all plugs are
properly inserted as indicated in the instruction manual. In the case of
damage immediately unplug the power lead.
Check the functioning of the mechanically adjustable elements (side railings,
overhead boom, foot-end).
Check that the manual controls function properly. If a function is faulty, kindly
disconnect the power plug.
Operation of the sliding rail of the side railings (headrest and foot-end)
Placement of the slats in the slatted frame (if available)
The condition of the wooden parts
Overhead boom (fit / deformation)
Lubricating from moving parts
General review
Disinfection
Cleanness
Airing of the mattress used
Page 18
Luna
2010-11