Transport And Storage; Technical Data - Husqvarna BLi100 Manual De Instrucciones

When all the LEDs are lit on the battery, it is fully charged.
(7)
Regularly check that the battery charger and the battery
are intact.
The battery must be charged before using it the first time.
The battery is only 30% charged when delivered.
• Put the battery in the battery charger. Make sure that
the battery is connected to the battery charger. (1), (2)
• The green charging light on the charger is lit when the
battery is connected to the battery charger. (4)
• When all LEDs are lit the battery is fully charged. (7)
• Remove the battery from the battery charger. Use the
battery in surroundings where temperatures are
between -10 °C and 40 °C.
• Use the battery charger only when the surrounding
temperature is between 5 °C and 40 °C.
NOTE!
During charging, monitoring the charging process and
never leave the battery in the charger when charging is
complete.

Transport and storage

• The contained lithium-ion batteries are subject to the
Dangerous Goods Legislation requirements.
• For commercial transports e.g. by third parties,
forwarding agents, special requirement on packing
and labeling must be observed.
• For preparation of the item being shipped, consulting
an expert for hazardous material is required. Please
also observe possibly more detailed national
regulations.
• Tape or mask off open contacts and pack up the
batteriy in such a manner that it cannot move around
in the packing.
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• Store the battery and the battery charger in a dry,
moisture-free and frost-free space.
• Store the battery where the temperature is between 5
°C and 25 °C and never in direct sunlight.
• Be sure to store the battery separate from the battery
charger.
• Do not store the battery in places where static
electricity can occur. Never store the battery in a metal
box.
• Before longer storage please charge the battery.
Maintenance
Make sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
are always clean and dry before the battery is placed in
the battery charger.
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.
4 – English
BATTERY HANDLING
Fault codes
Troubleshooting the battery and/or the battery charger
during charging. (5), (6)
•
•
Disposal of the battery, battery charger
and machine
Symbols on the product or its packaging indicate that this
product cannot be handled as domestic waste. It must
instead be submitted to an appropriate recycling station
for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.

Technical data

Possible
LED display
faults
Temperature
Error LED
deviation.
flashing
Battery flat
Cell
Error LED is lit difference too
much (1V).
The battery will not be charged if the battery
temperature is over 50 °C. In that case the battery
charger will actively cool down the battery.
If the warning LED on the battery charger lights solid
red, there is a fault with the charger. Send the charger
to a Husqvarna service workshop.
BLi100
Types of
Lithium-Ion
battery
Battery
capacity, 2,6
Ah
Voltage, V 36
Weight, kg 0,8
Possible action
Use the battery in
surroundings where
temperatures are
between -10 °C and
40 °C.
Charging the battery
Contact your service
agent.
BLi200 BLi300
Lithium-Ion Lithium-Ion
5,2 9,4
36 36
1,3 1,9