Husqvarna LC 247i Manual De Usuario página 12

• Do not tilt the product when
the motor is started.
• Be careful when you pull the
product rearward.
• Never lift up the product when
the motor is started. If you
must lift the product, first stop
the motor, turn the safety key
to 0 and remove the battery.
• Do not walk rearward when
you operate the product.
• Stop the motor when you
move across areas without
grass, for example paths
made of gravel, stone and
asphalt.
• Do not run with the product
when the motor is started.
Always walk when you operate
the product.
• Stop the motor before you
change the cutting height.
Never make adjustments with
the motor started.
• Never let the product stay out
of view with the motor started.
Stop the motor and make sure
that the cutting equipment
does not rotate.
Safety instructions for operation
Personal protective equipment
WARNING: Read the
warning instructions that
12
follow before you use the
product.
• Personal protective equipment
cannot fully prevent injury but
it decreases the degree of
injury if an accident does
occur. Let your dealer help
you select the right equipment.
• Use heavy-duty slip-resistant
boots or shoes. Do not use
open shoes or go with bare
feet.
• Use heavy, long pants.
• Use protective gloves when
necessary, for example when
you attach, examine or clean
the cutting equipment.
Safety devices on the product
WARNING: Read the
warning instructions that
follow before you use the
product.
• Do not use a product with
defective safety devices.
• Do a check of the safety
devices regularly. If the safety
devices are defective, speak
to your Husqvarna service
agent.
1199 - 003 - 28.04.2020