Coffee Pods; Hot Water; Tips For Choosing Coffee - Saeco Via Venezia RI9367/47 Instrucciones De Uso

ENGLISH
5.2 Coffee pods
• (Fig.9-A) - Remove the ground coffee filter (12) from the
portafilter (13) by pulling it up.
• (Fig.10) - Insert the coffee pod adapter (14), with the
curved part facing down, into the portafilter (13); then
insert the pod filter (15).
• (Fig.11) - Insert the portafilter in the brew unit from the
bottom (2).
• (Fig.12) - Turn the portafilter from left to right until it locks
in place.
Release the grip from the portafilter. The handle is
automatically turned slightly towards the left.
This movement assures the perfect functioning of the
portafilter.
• (Fig.14) - Preheat the portafilter by pressing the brew
button (16). Water will spill out of the portafilter (this
operation is only necessary for the first coffee).
• After 4 oz. (50cc) of water has flowed out, press the brew
button (16) again to stop hot water dispensing.
• (Fig.16) - Remove the portafilter from the machine by
turning it from right to left and emptying out the remaining
water.
• Insert the pod in the portafilter; make sure the paper from
the pod does not overhang the portafilter.
• (Fig.11) - Insert the portafilter in the brew unit from the
bottom (2).
• (Fig.12) - Turn the portafilter from left to right until it locks
in place.
• Take 1 preheated cup and place it under the portafilter;
check that it is correctly placed under the coffee
dispensing holes.
• (Fig.14) - Press the brew button (16).
• When the desired quantity of coffee has been obtained,
press the brew button (16) again to stop coffee brewing
and remove the cup of coffee.
• (Fig.16) - Wait a few seconds after dispensing, then
remove the portafilter and dispose of the used pod.
note: Keep the filter of the portafilter clean
by removing it from its seat and washing with
drinking water (Fig. 17).
6 tIPS For CHooSInG CoFFee
As a general rule any type of coffee available on the
market can be used. However, coffee is a natural product
and its flavor changes according to its origin and blen-
ding. It is therefore a good idea to try different types, in
order to find the most suited to your personal taste.
For best results, we recommend using blends which
are expressly indicated for espresso coffee machines.
Coffee should always be dispensed by the portafilter
without dripping. The speed of coffee dispensing can be
modified by slightly changing the amount of coffee in the
filter and/or using a different coffee grind.
• 10 •
BeFore USInG tHe Hot WAter/SteAm WAnd,
mAKe SUre tHAt tHe WAnd IS PoSItIoned
oVer tHe drIP trAy.
7 Hot WAter
danger of scalding! At the beginning, short
spurts of hot water may come out. the brewing
spout can reach high temperatures: do not touch it with
bare hands.
• (Fig.7) - Press the ON/OFF button (18). The inside light
turns on.
• Wait until the brew button light (16) turns up. The machine
is now ready.
• (Fig.18) - Place a container or glass under the steam/hot
water wand (Pannarello). Open the knob (5) by turning it
counterclockwise.
• When the desired quantity of hot water has been dispen-
sed, close the knob (5) by turning it clockwise.
• Remove the container with hot water.
8 SteAm / CAPPUCCIno
danger of scalding! At the beginning, short
spurts of hot water may come out. the brewing
spout can reach high temperatures: do not touch it with
bare hands.
• (Fig.7) - Press the ON/OFF button (18). The inside light
turns on.
• Wait until the brew button light (16) turns on.
• (Fig.19) - Press the steam button (17). The brew button
light goes off (16).
• Wait for the steam button (17) and brew button (16) lights
to turn on. Now the machine is ready to eject steam.
• (Fig.18) - Insert a container below the steam spout and
open the knob (5) for a few seconds, so that remaining
water exits from the steam/hot water wand (Pannarello);
in a short time only steam will come out.
• Close the knob (5) and put the container away.
• Fill 1/3 of the container you wish to use to prepare the
cappuccino with cold milk.
Use cold milk to get a better froth.
• (Fig.20) - Immerse the steam wand in the milk and open
the knob (5) by turning it counterclockwise; turn the
milk container with slow upward movements so that it is
warmed evenly.
• Close the knob (5); take the cup with the frothed milk.
• (Fig.19) - Press the steam button (17) again.
• Proceed with circuit priming as described in section 4.5
to make the machine ready for use.