RIDGID R4122 Manual Del Operador página 19

ASSEMBLY
 Turn the fence screws counter clockwise 2-3 times to
loosen and slide miter fences toward the saw arm until
they are flush with the miter table.
 Remove the sliding miter fences by pulling them up and
away from the miter table.
SOCKET
HEAD
SCREW
SLIDING
MITER
FENCE
FENCE
SCREW
SLIDING
MITER
FENCE
DETENT
RELEASE
BUTTON Fig. 20
FENCE
SOCKET
HEAD
SCREW
Fig. 21
 Using the blade wrench, loosen the socket head screws
that secure the fence to the miter table. See figure 21.
 Rotate the fence left or right until the saw blade is parallel
with the square.
 Retighten the screws securely. Check blade squareness
to fence and readjust if necessary.
 Replace the sliding miter fences.
Your saw has several scale indicators. After squaring
adjustments have been made, it may be necessary to loosen
the indicator screws and reset them to zero. See Figures
22 - 23.
INDICATOR
SCREW
MITER
SCALE
FENCE
SCALE
INDICATOR
BEVEL
SCALE
19 - English
SCALE
INDICATOR
SCALE
INDICATOR
INDICATOR
SCREW
Fig. 22
Fig. 23