Hardware Overview; Hardware Installation - D-Link DAP-2360 Guia De Instalacion

2. Hardware Overview

LAN - Solid light when the Ethernet port is connected
to a working port, such as a router or switch. The light
will blink when there is traffic through LAN port.
2.4 GHz - When lit, the access point is operating at
2.4GHz. This light will blink when there is wireless
traffic.
POWER - The light will blink during boot up. Once solid, the access point is ready.

3. Hardware Installation

Antennas
RESET
LAN(PoE)
5V 2.5A
Power Receptor
LAN Port (PoE)
Reset
3
D-Link DAP-2360 Quick Install Guide
DAP-2360_A1_QIG_v1.00(EU).indd 3 2011/9/15 下午 05:04:42