AMQ KINEX Guia De Instalacion página 18

PHASE 8 | Bridge Connector Assembly
1
2
Step 1
Remove beam side covers .
Step 2
Position the bridge connector as in diagram .
WARNING
KINEX INSTALLATION GUIDE | 18
3
KINEX SINGLE RUN is not designed for single unit application .
Minimum deployment of 2 units is advised .
Step 3
Secure the bridge connector with M6*10 screw
provided .
Step 4
Joint in the next table and screw in .
KINEX SINGLE RUN
4
amqsolutions.com