Troubleshooting - TECshow NAVIGATOR WI DMX Manual De Usuario

10. TROUBLESHOOTING

Problem
No signal
No action
Fixture setting correctly
but does not respond to
controller
Save this instruction properly. All the information is subject to change without prior notice.
P. 10
Tecshow Navigator WI DMX | English version
Problem probable cause(s)
No power to the fixture
Wrong setting of dip switch
Electrical malfunction
DMX cable is not being
transmitted.
Signal in/output connection
maybe reversed
Suggested Remedy
Check power supply.
Refer to manual and resetting.
Consult service technician.
Check controller.
Check connection and cables, change
new cables if necessary. Use a cable
that has worked properly with other
equipment.
Adjust it into correct position.