Oregon ST250 Manual De Instrucciones página 16

uNpACKiNg AND ASSEMBLY
ATTACHING THE GUARD
The guard fits onto the slot on the
trimmer motor housing (Fig 5)
• Turn the trimmer/edger upside down
• Slide the guard onto the trimmer until it
clicks into place (1)
• Tighten the screw on the guard (2) to
hold the guard in place
IMPORTANT: INSTALL THE SCREW TO
MAkE SURE THE GUARD STAYS IN
PLACE.
Fig. 5
(2)
14
(1)
OREGON® Cordless Tool System
TRIMMER/EDGER MODEL ST250
AF 0513 - F/N 558937