Door Removal Instructions - AEG RMB96716CX Manual Del Usuario

12. DOOR REMOVAL INSTRUCTIONS

12.1 Getting through narrow
spaces
If refrigerator will not fit through an
entrance area, doors can be removed.
Check first by measuring the entrance.
To prepare for removing the
doors:
1. Make sure the electrical power cord
is unplugged from the wall outlet.
2. Remove any food from the door
shelves and close the doors.
To remove the refrigerator
doors:
1. Open doors to 90°.
2. Remove all five Phillips screws from
top hinge cover and lift up.
3. Trace lightly around the door's top
hinges with a pencil. This makes
reinstallation easier.
4. Lift off the top hinge cover.
5. Disconnect electrical harness running
from door to hinge cover.
6. Pull up on water line gently to remove
from door.
NOTE
Use care while pulling the water
tube from the door to be sure
that tube does not kink.
NOTE
Approximately four feet of water
tube will be pulled from the
refrigerator door.
ENGLISH 23