Specific Safety Rules - Milwaukee 2790-20 Manual Del Operador

Warning
heed all warnings listed below, may result in electric shock, fire and/or serious personal injury.
keep These insTrucTions.
• Read these instructions.
• Keeps these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water. Never
immerse the apparatus in liquid or allow a liquid
to flow inside the apparatus. Water entering an
apparatus will increase the risk for electric shock.
• Clean only with dry cloth. Certain cleaning
agents and solvents are harmful to plastics and
other insulated parts. Some of these include:
gasoline, turpentine, lacquer thinner, paint thin-
ner, chlorinated cleaning solvents, ammonia and
household detergents containing ammonia. Clean
dust and debris from vents. Keep the apparatus
handle clean, dry and free of oil or grease.
• Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
• Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus. Do not abuse the cord. Never use
the cord to carry the radio or pull the plug from
an outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of
electric shock and may create a fire.
• Use only attachments/accessories specified
by the manufacturer.
• Unplug this apparatus during lightning storms
or when unused for long periods. Remove
power supply from outlet when not in use.
• Only plug power supply into readily accessible
outlet to allow the appliance to be unplugged
quickly.
• Only operate this apparatus in a well ventilated
area.
imporTanT safeTy insTrucTions
read, undersTand and folloW all insTrucTions
• Refer all servicing to qualified service person-
nel. Servicing is required when the radio has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or ob-
jects have fallen into the radio, the radio has been
exposed to rain or moisture or does not operate
normally. Service or maintenance performed by
unqualified personnel could result in a risk of injury.
• A battery operated radio with integral batteries
or a separate battery pack must be recharged
only with the specified charger for the battery.
A charger that may be suitable for one type of
battery may create a risk of fire when used with
another battery.
• Use battery operated radio only with specifi-
cally designated battery packs. Use of any other
batteries may create a risk of fire.
• When battery pack is not in use, keep it away
from other metal objects like: paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause sparks, burns, or a fire.
• Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and refrigera-
tors. There is an increased risk of electric shock
if your body is grounded.
• Do not use any adaptor plugs.
• When operating a radio outside, use an out-
door extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.
• Never disassemble the radio or try to do any
rewiring on the radio's electrical system.
• Do not expose this apparatus to dripping and
splashing, or place objects filled with liquids
on this unit.

specific safeTy rules

• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
• This radio is designed to be powered by a
standard 120 volt AC line or AC generator. It
may also be powered using a 12, 14.4, 18 or 28
volt
MILWAUKEE
use with any other voltage or power supply.
2
. Failure to
battery pack. Do not attempt to